
CEL-360
Datalogging Noise
Dosimeter
Dosimeter and Sophisticated Sound Level Meter in One
![]() |
If you want to get the data and go, this is the instrument for you -- because nothing could be simpler than the operation of the CEL-360 or more reliable than its measurements. After the instrument loads the OSHA or other custom setup, it automatically collects and stores for later printout all run-session data, including Lmax, Lavg, Lpeak and any Ln. The CEL-360 logs data from as many as 50 separate locations or 50 employees. You can delay the stop and start for any or all of the 50 runs. The CEL-360 is also a sound level meter in disguise and can be used as an ANSI Type 2 integrating sound level meter with functions for SPL, Lmax, Leq, Leql, Lavg and TWA (time weighted average calculation) - user selectable. |
| Measuring Range | 70 to 140 dB, 50 to 120 dB, 30 to 100 dB (for sound level mode), peak over top 40 dB of range |
| Frequency Weighting | A, C and linear weightings for peak |
| Response | Fast, slow, impulse, peak |
| Exchange Rate | 3, 4, 5, 6, dB user selectable |
| Thresholds | Two levels, 75 to 90 dB, user selectable |
| Datalogging | Stores data in 50 separate memories,
more than 220,000 data points. Projected doses for 8 hour day |
| Monitoring Intervals | 5, 10, 15, 30, 60 minutes or 1, 2, 4, 8 hours |
| Standards | ANSI S 1.4, S 1.25, IEC 651, 804, 1252 |
| Power | 9V alkaline battery, 50 hours operation |
| Dimensions (HWD) | 4.8" x 2.6" x 1.2" |
| Weight | 8 oz |
Click here for ordering information
1-800-731-7071
© 2006 Instrument Depot®
info@instrumentdepot.com