gastecheader.gif (8751 bytes)
GASTEC Gas Detection System:
HazMat and Smoke Tube Kits
Gastec Navigator: Detector Tubes Pump HazMat and
Smoke Tube Kits		 8-Hour Diffusion Tubes Tubes for Dissolved
Substances in Solution

The HazMat kit is a handy way to screen sites and perform quick detection of many compounds. It includes tubes and accessories in a carrying case. Deluxe HazMat Kit

Fast, Accurate, On-the-Spot Identification of Unknown Chemicals
On-the-spot detection of airborne contaminants for hazardous and emergency response teams and military assessment. Lightweight, rugged and ready to use anywhere. No calibration, no electrical requirements.

How It Works
Use the decision chart in the kit and the pre-calibrated, direct-read detector tubes to obtain quantitative results. The tubes have distinct lines of demarcation for easier viewing and require no interpretation, dual scales or color charts.


Complete Deluxe HazMat Kit includes:
Gastec model GV-100 sampling pump, five-meter extension hose with rubber shroud tube holder, detector tube handbook, two lightsticks, one Irritant Smoke Tube Kit, M8 detection paper for 100 tests for toxic nerve agents (V and G) and blister agents (H), tweezers, laminated decision chart and waterproof Pelican case with custom foam insert.

The kit also includes one box (10 tubes per box) each of Gastec detector tubes for ammonia (part number 3L), benzene (part 121S), carbon monoxide (1LA), chlorine (8LA), ethyl acetate (141L), hydrogen cyanide (12L), hydrogen sulfide (4LL), hydrocarbons low class (103), hydrocarbons high class (105), petroleum naphtha (106), Polytec I tubes qualitative (107), Stoddard Solvent (128) and sulfur dioxide (5LB).

Deluxe HazMat Kit $1,425.00

For replacement tubes, click here.  

The Polytec I and Polytec IV tubes determine the presence of multiple unknown substances, simultaneously.

Polytec I tests for carbon disulfide, hydrogen sulfide, carbon monoxide, acetone, acetylene, ethylene, benzene, propane, styrene, trichloroethylene, gasoline and toluene.

Polytec IV tests for ammonia, hydrogen chloride, hydrogen sulfide, chlorine, sulfur dioxide, nitrogen dioxide, acetylene, carbon monoxide, ethylene, phosphine, hydrogen, methyl mercaptan, propylene, carbon dioxide.


Smoke Tube Kit
Quick, simple and inexpensive.  Use smoke tubes to trace and determine the source, direction and dispersion of air currents.  Highly visible white smoke provides an immediate and obvious cue to the directional pattern of air currents.  Extended shelf life and broad environmental operating conditions.

Can also be used for respirator fit testing, for OSHA-accepted qualitative fit testing.  No warm-up time,
no calibration, no chemical mixtures to prepare in advance.

Gastec smoke tube kit

Smoke Tube Kit $59.95
Kit includes 6 smoke tubes, aspirator bulb pump, tube tip breaker pins, tube protector, manual and carrying case.

 Add to Cart button for smoke tube kit  

For replacement smoke tubes, click here

Measure Contaminants in Compressed Gas
Deluxe Airtec Regulator Kit

Airtec tubes are a convenient and simple way to test a gas cylinder, compressed breathing air or an air line for harmful airborne contaminants. The Airtec Regulator Kit has everything you need to measure contaminant levels in compressed gas and supplied air. With no need for batteries or electrical power, the portable kit is intrinsically safe and can be used anywhere, any time.

The kit comes with Gastec brand Airec tubes for oil mist, water vapor, nitrogen dioxide, carbon dioxide and carbon monoxide. The regulator does not require sensor calibration and is always ready to use.

Airtec Regulator Kit includes the regulator assembly, rubber shroud tube holder, detector tube handbook, operating manual, box of 10 carbon monoxide tubes (part no. 1A, measuring range of 5 to 50 ppm), box of 10 carbon dioxide tubes (part no. 2A, measuring range of 250 to 3000 ppm), box of 10 water vapor tubes (part no. 6A, measuring range of 30 to 80 mg/m3), box of 10 water vapor tubes (part no. 6Ag, measuring range of 150 to 3000 mg/m3), box of 10 oil mist tubes (part no. 109A, measuring range of 0.3 to 1.5 mg/m3), and a hard shell carrying case.
Kit is part no. STD-301 $1,350.00
Airtec regulator kit
Add to Cart button

Airtec Replacement Tubes
10 tubes per box
Carbon Monoxide (included in kit) 1A 5 to 50 ppm $65.50
Carbon Dioxide (included in kit) 2A 250 to 3000 ppm $65.50
Carbon Dioxide 2Ag 200 to 3000 ppm $66.00
Nitrogen Oxides 11A 0.02 to 2 ppm $60.65
Oil Mist (included in kit) 109A 0.3 to 1.5 mg/m3 $62.80
Oil Mist 109AD 0.2 to 5.0 mg/m3 $60.65
Water Vapor 6AH 500 to 5000 ppm $60.65
Water Vapor (included in kit) 6A 30 to 80 mg/m3 $64.40
Water Vapor (included in kit) 6Ag 150 to 3000 mg/m3 $68.70


Click Here for Ordering Information.
Back to Tubes, Badges and Accessories
Depot Directory
 Navigate around the Depot!

1-800-731-7071
© 2007 Instrument Depot®
info@instrumentdepot.com